Boero Magellan 630
6 mins read

Usually, I’m personally very Daydreamerskeptical about antifouling paints since, in my 20-year experience as a boat owner and sailor, I’ve always had trouble having a clean hull. After trying many different products, I got used to careen my boat before my sailing competitions to prevent myself from sailing “with the handbrake on”. Even when I stopped taking part to races, I was used to get my hull cleaned as late as possible, preferably in late June, just a few weeks before my summer cruises.

In this spirit, we’ve tested the Magellan 630 by Boero Yacht Coatings. It’s a copper-free self-polishing antifouling paint with innovative SPC technology (Self Polishing Copolymer).

The product was applied on our boat last March in our test centre located within Alfa Shipyard in Marina di Varazze, Italy. On that occasion, assisted and supervised by the attentive Boero staff, we filmed the video tutorial you can now find below.

Boero Magellan 630 timoneAt her berth, our Daydreamer exposes her left side to the sun; moreover, our next berth neighbor hasn’t put his boat in the water until mid-July, so this will inevitably be the “weak” side of our test. Water temperature, in fact, significantly contributes to cause rapid fouling.

Today, 3th August, we’re in Corsica and we dive to find out what’s happened 5 months after the application of this antifouling paint on our hull.

As soon as the bobbles generated by our dive clear away, the Daydreamer’s hull clearly appears. Our first impression is positive and we’re immediately astonished by the fact that hull, shaft and propeller are all substantially clean. Of course, there’s a very slight green ring here and there but no sign of fouling is there.

No sign of protozoa or macro-algae, except for sea cocks that, Denti di caneinstalled after the treatment, are literally overrun with dandelions.

The delimitation of the area exposed to the inauspicious proliferation explains a lot about the real efficiency of the product.

We continue our underwater inspection and decide to have a look at both the skeg and rudder blade, whose zones positioned close to the waterline are normally subject to the phenomenon because of their verticality and consequent sun exposure. Everything is ok and perfectly clean. The centre board, too, is equally clean.

Since we careened, we’ve covered about 750 nautical miles, both sailing and navigating under power. Shafts and propellers are generally the areas most exposed to the problem, especially if, as in our case, the propeller is equipped with steerable blades. The mechanisms that feather the propeller and reverse blades are usually the first to be covered with fouling. However, what we find is just a slight inevitable ring and some little “flowerings” on the surface.

Magellan 630 BoeroConclusions

The Magellan 630, used for our hull,  and the Orion Extra, applied on both shaft and propeller, feature an above-average quality. What I can say is that I’d never seen such performances.

Of course, the application quality, too, is important and Alfa Shipyard has done a really good work.

As you know, our Daydreamer will be docked at the Marina Porto Anticola during the next Genoa International Boat Show, where we’ll be very pleased to welcome our readers and share our tests and experiences. As an alternative, if you’re sailing between Corsica and Sardinia, you can see with your eyes what is written in this article. After all, diving in these warm crystal-blue waters is always a pleasure.

Product descriptions (as presented in the producer’s website)

Antivegetativa Boero
A step of the antifouling treatment

MAGELLAN 630, TRANSOCEANIC SPC ANTIFOULING

Copper-free self-polishing antifouling with innovative SPC (Self Polishing Copolymer) technology. This antifouling performs both in freshwater and saltwater, ensuring maximum effectiveness against the most aggressive fouling and optimizing fuel consumption with consequent reduction in emissions (CO2). It contains no tin and can be applied on all surfaces, including aluminum. The colors are brilliant, to be used only in professional applications. It meets the requirements of IMO (AFS/CONF/26) on antifouling and uses biocides already in line with the BPR Directive (European Biocide Product Regulation). It is suitable for boats with speeds greater than 35 knots; depending on the thickness of the film, it can be suitable for various seasons.

ORION EXTRA, ANTIFOULING FOR PROPELLERS, SHAFTA AND OUTDRIVES

Insoluble matrix antifouling specific for protecting propellers, steel shafts and aluminium outdrives from marine fouling.

MISTRAL FONDO, CHLORINATED RUBBER UNDERCOATS

Anti-corrosive mono-component chlorinated rubber undercoat is a highly waterproofing product, developed for underwater surfaces. It is ideal as sealer on old antifouling of unknown nature before applying the new antifouling. It allows to obtain a high-thickness and creates a true “barrier effect” between the water and the painted surface. It can be applied on properly prepared steel and wood both internally or externally of the boat. It is also recommended as an undercoat on emerged surfaces in mono-component painting systems.

Hull treatment Video Tutorial

https://www.facebook.com/tuttobarche/videos/1536975602988128/

Leave a Reply

Your email address will not be published.

Previous Story

NAUMATEC E-TENDER 460. REVOLUTIONARY LUXURY TENDERS WILL JOIN CANNES YACHTING FESTIVAL

Next Story

FEAR IN IBIZA. VIOLENT SQUALL ATTACKS BOATS AT ANCHOR